All free tools

Plumbing services · Homeowners & contractors

House Plumbing & Sanitary Cost Calculator Nepal

Estimate whole-house plumbing cost from water points, drainage points, riser and main line lengths, tank connections and sanitary fixtures—with editable Nepal planning rates.

Free foreverNo account requiredInstant results

Example rates only — replace with local quotes

Point rates assume CPVC supply and PVC drainage with standard fittings and labour. Pipe brand, concealed versus exposed runs, hot-water looping, imported sanitaryware and multi-storey pumping change the total. Septic tank, soak pit and sewer connection are separate scopes—size those with the septic tank calculator.

Enter your project details

Your estimate

A whole-house plumbing and sanitary estimate built from point counts, riser length, tank connections and fixture allowance.

Water supply points
NPR 56,000

16 × NPR 3,500 (suggested ≈ 14)

Drainage / waste points
NPR 45,000

10 × NPR 4,500 (suggested ≈ 10)

Risers & main lines
NPR 54,000

120 ft × NPR 450 across 2 floor(s)

Tank & pump connections
NPR 30,000

Underground sump, overhead tank, pump, valves

Sanitary fixtures
NPR 144,000

12 fixtures × NPR 12,000

Plumbing subtotal
NPR 329,000
12% contingency
NPR 39,480
Planning budget
NPR 368,480
Cost per bathroom
NPR 122,827

Whole-house plumbing spread over bathroom count

Planning estimate only—not a quotation and not a plumbing design. Septic tank and soak pit construction, municipal sewer or water connection charges, rainwater downpipes, solar or gas water heating, water treatment and pressure-boosting systems are outside these lines unless you add them.

What this estimate assumes

What counts as a plumbing point

  • A water point is one tap, shower, flush or appliance connection fed from the riser. A drainage point is one trap or waste outlet connected to the stack.
  • Suggested counts assume four water points and three drainage points per bathroom, two water points and one drain per kitchen.
  • Riser length is the vertical and horizontal main run, not the branch pipework inside rooms—that sits inside the point rate.
  • Fixtures are counted as pieces (WC, basin, shower set, mixer, sink, tap) so you can price a basic and a premium package side by side.

Formulas used

  • Points cost = water points × water rate + drainage points × drainage rate
  • Riser cost = riser length × riser rate
  • Subtotal = points + riser + tank package + fixtures
  • Total = subtotal × (1 + contingency%)

Practical guide

Understand the numbers before you use them on site

Read the related guide for assumptions, ordering tips and ways to compare the estimate with actual site records.

Read guide

Same-category tools first so each intent stays clustered—then open the full hub if you need a different job.

Frequently asked questions

Use the estimate with confidence

Is the Plumbing & Sanitary Cost free?

Yes. The Plumbing & Sanitary Cost works in your browser without an account. You can install GharNaksa when you want to track the real project costs, payments and progress.

Can I use this result as a final quotation or professional approval?

No. It is a planning estimate based on the information you enter. Verify rates, quantities, drawings, local requirements and contract terms with the appropriate qualified professional before making a commitment.

How do I track the estimate during construction?

Use GharNaksa to record actual material deliveries, labor, payments, bills and site photos. Comparing the estimate with a dated site record helps reveal cost differences early.